
Chimney Inspection Levels: Level 1, Level 2 and Level 3 Explained
Serving Brooklyn and nearby cities.
- Diagnosis before any repair
- Written price up front
- Written price before we start
Chimney inspections come in three levels, and the right one depends on what has changed with your chimney, not just on how long it has been. The NFPA 211 standard, which chimney professionals follow, calls for chimneys, fireplaces and vents to be inspected once a year. This guide explains what a Level 1, Level 2 and Level 3 inspection each cover, when each one makes sense, what you receive afterward, and how to get your Brooklyn home ready for the visit.
Level 1: The Yearly Check When Nothing Has Changed
A Level 1 inspection is the standard annual check for a chimney that is being used the same way it was last year. That means no new appliance, no change of fuel and no known problems. Our certified technician examines the readily accessible parts of the chimney exterior and interior, along with the connected fireplace, stove or heating appliance.
The technician checks the firebox, damper and visible smoke chamber, looks at the crown and cap from a safe vantage point, and examines the flue for soot and creosote buildup, blockages such as nests or debris, and obvious cracks or damage. A Level 1 does not involve opening walls or using special equipment to reach concealed areas. If everything checks out, you're set until next year. If something needs a closer look, we'll explain what we saw and recommend the next step.
Level 2: When the System Changes or the Home Is Sold
A Level 2 inspection includes everything in a Level 1, plus a look at accessible areas in attics, basements and crawl spaces, and a video camera scan of the full length of the flue. The standard calls for a Level 2 when the system changes, such as a new appliance or a switch of fuel, or when the home is sold. We also recommend one after a chimney fire or storm damage, because that damage is often inside the flue where you can't see it.
Oil-to-gas conversions deserve special attention in New York City. When a building converts its boiler from oil to gas, the chimney has to be evaluated as part of the work. A new liner is often needed, because gas exhaust produces acidic condensate that can corrode a masonry flue. A camera scan shows whether your existing flue can handle the change or whether Chimney Liner Installation should be part of the project.
- Adding or replacing a boiler, furnace, fireplace insert or stove
- Switching fuels, for example converting a boiler from oil to gas
- Buying or selling a home
- After a chimney fire, even a small one
- After a storm or other event that may have damaged the chimney
- When a Level 1 inspection turns up a problem that needs a closer look
Level 3: Reaching a Hidden Hazard
A Level 3 inspection is used when a serious hazard is suspected but can't be reached any other way. It includes everything in Levels 1 and 2, and it requires opening part of the chimney or building, such as a section of chimney wall, a chase panel or interior drywall, to get to concealed areas.
We don't start with a Level 3. It usually follows a Level 2 that revealed signs of a hidden problem, such as a damaged flue that runs behind a finished wall or a structural concern the camera can't fully show. Before any opening is made, we'll walk you through exactly what needs to be removed and why. Once the problem is fully understood, Chimney Repair or Chimney Rebuilding can be planned around what we actually find.
What You Receive After Your Inspection
After every inspection, you get a written report describing the condition of your chimney, fireplace and venting, along with photos of what our technician found. Level 2 and Level 3 inspections also include video from the camera scan, so you can see the inside of your flue for yourself.
The report separates urgent safety issues from items you can plan for later. Common recommendations include a Chimney Sweep to remove creosote, a Chimney Cap & Chase Cover to keep out rain and animals, Chimney Waterproofing for porous masonry, or Fireplace & Damper Repair. If you're buying or selling, the report gives everyone a clear record to work from.
How to Prepare for the Visit
A little preparation helps the inspection go smoothly and keeps your home clean.
- Stop using the fireplace or stove at least a day ahead so the system is cool
- Clear the area in front of the fireplace and move fragile items off the mantel
- Make sure we can reach the boiler or furnace, and the attic or basement if you've booked a Level 2
- Keep pets in a separate room while we work
- Write down any concerns, such as smoke in the room, odors, water stains or debris falling into the firebox
- Have records of past repairs, liner work or appliance changes on hand
Timing Your Inspection in New York City
New York City's heat season runs from October 1 through May 31, when building owners must keep apartments heated to the city's minimum temperatures. If you own a building that relies on a boiler, scheduling your inspection before October leaves time to finish any repairs before tenants need heat. Homeowners who burn wood benefit from the same timing, since problems are easier to fix before the first cold night.
Inspections
Three levels of chimney inspection
The NFPA 211 standard calls for a yearly inspection. Which level you need depends on what has changed since the last one.
-
Level 1
Annual check
For a chimney and appliance that have not changed and will be used the same way: the readily accessible parts of the chimney, the flue and the connection, checked for soundness, blockages and deposits.
-
Level 2
Camera inspection
When something changed — a new stove, insert or boiler, a fuel switch such as oil to gas, the sale of the home, or a chimney fire, storm or quake. Adds a video scan of the whole flue and the accessible attic, roof and crawl spaces.
-
Level 3
Concealed areas
Only when a Level 1 or 2 points to a hidden hazard that cannot be checked any other way: parts of the chimney or building are opened to reach it.
How often should my chimney be inspected?
The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. For most homes with no changes, that yearly visit is a Level 1 inspection.
Is a chimney inspection the same as a chimney sweep?
No. An inspection evaluates the condition of the chimney and venting, while a sweep removes soot and creosote. The inspection report will tell you whether a sweep is needed.
Which inspection level do I need when buying a home?
A Level 2. The sale of a home is one of the situations where a Level 2 is used, and the camera scan gives you a clear picture of the flue before you close.
Do gas appliances need their chimney inspected too?
Yes. The yearly inspection covers vents as well as chimneys and fireplaces. Gas exhaust produces acidic condensate that can corrode a masonry flue, so gas-fired boilers and furnaces need their venting checked.
Will a Level 3 inspection damage my home?
A Level 3 does require opening part of the chimney or building to reach the hidden area. We explain exactly what will be opened and why before any work begins, so you can make an informed decision.
Do I need to be home during the inspection?
We recommend it. Being there lets you point out concerns, give us access to the attic or basement, and go over the findings with the technician before we leave.
Schedule a Chimney or Vent Inspection
Tell us what you are noticing and what kind of building you live in. We will set up a visit, inspect the system, and give you a written price before any work begins.